SKU: CS-1901010008

MAXTRAP50 Vacuum Cold Trap, -50°C

• Temperatures to -50C
• UL & CSA Certified
• Eco Refrigerants
• Large KF-25 Inlet & Outlet
• Stainless Steel COLDWELL Trap

Included Connection: 4′ of 1″ Diameter Vacuum Tubing with KF-25 Flanges on each side. KF-25 clamps, centering rings for the connection tube

There are numerous laboratory grade cold traps on the market and everyone agrees they are a best practice tool for preserving/extending vacuum pump life or the time between vacuum pump maintenance. Cascade’s MAXTRAP50 is not an ordinary lab-grade cold trap. Cascade has taken our extensive knowledge of vacuum best practices and integrated the features necessary for our customers with time-sensitive, high-throughput, production-focused vacuum purging or drying applications.

$6,236.88

Complete System Includes:

  • Cascade’s COLDWELL 304 Stainless Steel Trap – patent pending baffle system.
  • 3 Quart Capacity (2839 mliters)
  • Viton Gasket
  • Labconco -50°C Refrigerated Base
  • Green CFC / HFC Free Refrigerants
  • KF-25 Inlet/Outlet, 1 each 4′ Connection Line with KF-25 flanges, clamps, centering ring
  • Power Cord
  • 3mm Neoprene Insulator Cap
  • Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids
  • Quality Made in USA
  • 1 Year Warranty

MAXTRAP Tips:

Safety
At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.

Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed
Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap.

The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted.

Quick Start Up Tips:

  • Remove shipping foam from reservoir bottom prior to use
  • Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line
  • Monitor ethanol levels inside reservoir
  • Allow at least 30 mins for trap to cool
  • Keep side vents clear. Allow at least 4″ for airflow
  • Monitor interior of stainless trap for clogging
  • Short tube – attach to vacuum pump
  • Tall tube – attach to vacuum oven

Specifications

COLDWELL STAINLESS TRAP:
KF25 Inlet & Outlet

3 Quart Capacity (2839 mliters)

Viton Gasket

Neoprene Insulator Cap

LABCONCO -50°C MECHANICAL BASE:
115V / 1ph / 3 AMP  (60Hz)

Cord Included

CFC / HCFC Free Refrigerants

DIMENSIONS:
inches 13.5 W x 23.5 D x 12.0 H
cm 34.3 x 59.7 x 30.5

*Requires approximately 800ml (~ 3.5 cups) of transfer fluid
(ethanol, glycol, cryo-cool fluids)

CONNECTIONS:
1 each 4′ KF-25 flanged vacuum rated line

1 each KF-25 Centering Ring

1 each KF-25 Clamp

WEIGHT:
COLDWELL Stainless Trap:  14 lbs
Thermo Mechanical Base: 60 lbs
Shipping Weight: 95 lbs

Complete System Includes:

  • Cascade’s COLDWELL 304 Stainless Steel Trap – patent pending baffle system.
  • 3 Quart Capacity (2839 mliters)
  • Viton Gasket
  • Labconco -50°C Refrigerated Base
  • Green CFC / HFC Free Refrigerants
  • KF-25 Inlet/Outlet, 1 each 4′ Connection Line with KF-25 flanges, clamps, centering ring
  • Power Cord
  • 3mm Neoprene Insulator Cap
  • Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids
  • Quality Made in USA
  • 1 Year Warranty

MAXTRAP Tips:

Safety
At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.

Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed
Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap.

The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted.

Quick Start Up Tips:

  • Remove shipping foam from reservoir bottom prior to use
  • Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line
  • Monitor ethanol levels inside reservoir
  • Allow at least 30 mins for trap to cool
  • Keep side vents clear. Allow at least 4″ for airflow
  • Monitor interior of stainless trap for clogging
  • Short tube – attach to vacuum pump
  • Tall tube – attach to vacuum oven