Cascade CDO-28 Mesh Bag
$87.00
FREE SHIPPING!
FDA Compliant Polypropylene Mesh Bags for the CDO-28 Oven
Item No: CDO-28-BAG
- Insure drying or decarboxylation is done thoroughly & uniformly
- Keep turbulent powders, ground material neat inside the oven
- 28″ Wide X 20.5″ Deep. Slit/Fold opening for stuffing
These mesh bags will fit all 28 cubic foot Cascade laboratory forced air ovens
- Cascade TEK Model TFO-28
- Cascade Sciences Model CDO-28
- SHEL LAB Model SMO-28
Purchase CDO-28 extra bags when:
- You add extra CDO-28 shelves to your oven
- Need to pre-load product prior to drying
- Replacement from wear and tear
- Six temp resistant bags are already included with the purchase of Cascade’s Model CDO-28 Dry and Decarb Oven
CDO-28 Mesh Bag Features:
- Temperature resistant, Non-outgassing
- Designed to fit the shelves on the CDO-28 Drying Oven
- Less Mess. Very fine mesh keeps drying neat
- Allows for airflow thru entire product during decarboxylation or drying process
- Works in any kitchen convection / forced air laboratory oven
- Sewn with love in Oregon, USA. Supporting our local small businesses
Guidelines:
The mesh bag material conforms to relevant parts of FDA 21 CFR 175-178 for direct food contact and has passed the USP Testing for Class IV Plastic.
General temperature performance from the manufacturer states a softening point of approximately 150°C / 300°F. Because the material is used in a wide variety of conditions/processes, the stated temperature parameter for softening may or may not apply to a customer’s specific use.
Ultimately customers must make their own determination that use of this mesh bag is safe and suitable for their intended application. These mesh bags are considered consumable items that do degrade and should be expected to be replaced with continued use.
CDO-28 MESH BAGS
XN4900 Natural Polypropylene Mesh
Bi-Planar Mesh extruded from FDA compliant polyproplyene. 30 stands per inch.
DIMENSIONS:
Width: 28″
Length: 20.5″
Thickness: 0.03″
OPEN AREA: 24%
HOLE SIZE: 0.018 x 0.018 in.
CAPACITY: Approx 2+lbs of medium ground material, 1 in. thick
RESIN (MATERIAL): Polypropylene (PP)
* Polypropylene products produced for some filtration applications are made from resin that complies with FDA regulations for food contact. The regulation compliance is product number dependent / specific.
* Impact at cold temperatures is likely to cause strand cracking or breakage.
RESIN GRADE: FDA Compliant
TEMPERATURE:
Melt Temperature: 363°F (161°C)
Softening Point: 300°F (150°C)
Heat Deflection Temperature: 194°F (90°C)
Glass Transition Temperature: 32°F (0°C)
GUIDELINES:
The mesh bag material conforms to relevant parts of FDA 21 CFR 175-178 for direct food contact and has passed the USP Testing for Class IV Plastic.
General temperature performance from the manufacturer states a softening point of approximately 150°C / 300°F. Because the material is used in a wide variety of conditions/processes, the stated temperature parameter for softening may or may not apply to a customer’s specific use.
Ultimately customers must make their own determination that use of this mesh bag is safe and suitable for their intended application. These mesh bags are considered consumable items that do degrade and should be expected to be replaced with continued use.
Related products
Decarb Oven Accessories
Forced Air Oven Products
Vacuum Ovens
Forced Air Oven Products
