MAXTRAP105 -105°C Vacuum Cold Trap, 120V

MAXTRAP105 Cold Trap Includes:

• Cascade’s COLDWELL 304 Stainless Steel Trap Insert  (Patent pending baffle system)
• 3 Quart Capacity (2839 ml)
• Viton Gasket for Vacuum Integrity
• Labconco -105°C Refrigerated Base
• Green CFC / HFC Free Refrigerants
• Power Cord
• 3mm Neoprene Insulator Cap
• Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids
• Quality Made in USA
• 1 Year Warranty
• Connection Lines and hardware: 4′ of 1″ Diameter Vacuum Tubing with KF-25 Flanges on each side. KF-25 clamps, centering rings for the connection tube

MAXTRAP  Tips:

Safety
At very cold temperatures, solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.

Don’t Stop: Keep Processing while trap is being reclaimed, cleaned, refreshed
Cold traps can become full or the captured material freezes and blocks flow. For high moisture, outgassing, 24 hour processing/vacuum purging consider adding a second, spare COLDWELL trap.

The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted.

Quick Start Up Tips:

• Remove shipping foam from reservoir bottom prior to use
• Fill reservoir with 800ml (+/-3.5 cups) ethanol to marked line
• Monitor ethanol levels inside reservoir
• Allow at least 30 mins for trap to cool
• Keep side vents clear. Allow at least 4″ for airflow
• Monitor interior of stainless trap for clogging
• Short tube – attach to vacuum pump
• Tall tube – attach to vacuum oven